Experiment : 1
Title:
To share printer, folder and drives(Windows share network setting).
Settings:
Step 1 first type Network and sharing Centre into the start menu and hit enter.
Step 2 : then click on change advanced sharing setting.
Step 3 : now in advance sharing setting turn on network discovering file and printer sharing and public folder sharing make sure these are able in both home or work and public profiles.
Step 4 : depending on your setup you might want to turn off password protected sharing other vice I will need to enter the password for each machine, which is not that big of a deal. Turning it off while you setting it up make things a bit easier through by saving a step.
Sharing printer
Step 1: open the device and printers panel there you will see a list with all external device installed on our PC. Go to the printer section & select the printer that you want to share.
Step 2 : right click on it & then go to the printer properties is the right click menu. Select the printer properties.
Step 3 : the printer properties window is open. Go to the sharing tab.
Step 4 : here you can share the printer with entire network check the box that say inverted "share this printer".
Step 5 : click ok a the printer is now shared with the other computer on your network.
Sharing file
Step 1 : right click on the folder or Drive that you wish the share and select properties.
Step 2 : select the tab sharing and click on "Advance sharing".
Step 3 : tick the box "share the folder" and inter us share name for it.
Step 4 : click on permission, make the group and tree "everyone and configure the network permission for this folder in the lower field" according to your requirements. If you just want to release your file for copying allowing "read" is using enough.
More often the not, you will also have to configure the user and tree everyone with the Desire right before it can be used properly for shared folders.
To do so-
Step 1 : right click on the folder and select properties again.
step 2 : this time switch to the tabn security click on edit followed by "add".
Step 3 : in this window enter everyone into the empty field at the button and click on Ok.
Step 4: take a quick look at the permission for every buddy and make sure they are all set correctly if everyone is in order close all Windows is ok.
Experiment : 2
Title :
connecting and disconnecting computer peripheral and component and driver installation.
Processor Installation:
Open up your processor box and gently take it out. Find the corner of 'p' that has a gold arrow on it. Then look at your mother board processor socket, for a similar arrowed corner lines, this two arrows up. Pull the Lever down to lock it in the place.
Set your cooler on top of your processor press down on the four pins until the click then twisting the top of the peg so they lock into the place.
RAM Installation:
find the RAM socket on your motherboard and pull two chips on the side down. Line up the notch in the socket and press down the RAM into the place. This might take a bit of pressure the chips should snap back into place when the RAM is fully in the socket.
Printer installation
Step 1 : click on start and then click devices and printer then you get the printer's page.
Step 2 : then you go tab and fine "add a printer" menu click on "add a printer".
Step 3 : now you got a printer setup wizard front of you and asking to "how do you want to install your printer" with USB cable or wireless network.
Step 4 : under local printer you can install printer with LPT port and with the USB cable.
Step 5 : select the USB port and select "USB001 (virtual port USB printer)" and the click on text.
Step 6 : now in the text Windows P ki or appropriate drivers for the particular printer. After that you get your printer driver successful installed.
